..................................................................................................................................................................................................................................................
Sensors - Instruments - Controls
HomePackaging/ConvertingLabel CountingSpark & Arc DetectionBattery ChargingContract ManufacturingOEM Services

Stand Alone Load Cell Controllers 

Stand-alone controllers are equipped with numerical display and programming keys. They may be calibrated and setup with the display and keys, with setup parameters stored in non-volatile internal memory. 

In operation, controllers continously measure and take control action, displaying measurements and control states on the front panel display. These controllers have a set of digital inputs and outputs which may be attached to PLC's or PC's with approriate interfacing circuitry for control or data reporting. 

Stand-alone controllers are mounted in DIN standard panel-mounted packages.

Contact Us and we will assist with your specialized applications for 
weight and force measurement. 
Stand Alone - Panel Mounted Controllers 
For Independent Measurement and Control

  • 754D-LM* Single Channel Controller
  • Models for Fill-by-Weight, Weigh against Setpoints
  • 4 or 6-wire bridge excitation accessed by screw terminal block
  • 4 digital inputs and 4 digital outputs accessed by 9-pin dsub connector
  • Six digit numeric display for measurment, two digit status display
  • Front panel key-driven setup and calibration procedures
  • On-board eeprom calibration and setpoint storage
  • 1/8 DIN panel mounted packaging
  • The 754D-LM4 Installation Guide is available on-line.